Circuit Design Studio

Build your team's circuit in the virtual circuit lab:

1. Build the circuit for your topic; set the values of supplies, resistors, LEDs… as your team calculated.
2. Add ammeters and voltmeters; record the current and voltage of each component to compare with your calculation table.
3. Create at least 1 fault on purpose (open circuit or short circuit), record the symptoms and measurements; then fix the fault and measure again.
4. Take screenshots of the complete circuit (and of the circuit with the fault) to submit in the Project 3 lesson.

A short circuit in the simulation is safe; in real life it can make batteries and wires hot and cause a fire.